Travel adapter from Barbados to Guinea — do you need one?

Q: What plug is used in Guinea?

Guinea uses Type C and Type F plugs at 230 V, 50 Hz.

Compare the plug shapes, voltage and frequency in Barbados and Guinea, and find out which adapter you need before you travel.

Adapter required

Yes — coming from Barbados, you will need a travel adapter for Guinea. Barbados uses Type A/Type B plugs, and Guinea uses Type C/Type F, so the pin shapes will not fit any wall socket. Voltages differ (115 V at home vs 230 V abroad), so check the label on each device. Most modern dual-voltage chargers handle the swing without a converter, but heating appliances usually do not.

Voltage converter may be needed. Check your device label — most modern electronics (phones, laptops) support 100–240 V and only need a plug adapter. Hair dryers, kettles, and older appliances may need a step-up or step-down converter.

Barbados (home)

Type A Two flat parallel pins 100–127V Type B Two flat pins + round ground 100–127V

Guinea (destination)

Type C Two round pins (Europlug) 220–240V Type F Two round pins + side earth contacts 220–240V

Electrical specifications in Guinea

Voltage

Barbados 115 V

Guinea 230 V

Differs

Frequency

Barbados 50 Hz

Guinea 50 Hz

Match

More about plugs in Guinea

In Guinea, the standard power plug is Type C and Type F. The country runs on 230 volts at 50 Hz. That means wall sockets in Guinea can be one of 2 different shapes — Type C, Type F, and your plug needs to physically match the socket to fit.

Full Guinea plug guide