Travel adapter from Haiti to Congo (DRC) — do you need one?

Q: What plug is used in Congo (DRC)?

Congo (DRC) uses Type C and Type E plugs at 230 V, 50 Hz.

Compare the plug shapes, voltage and frequency in Haiti and Congo (DRC), and find out which adapter you need before you travel.

Adapter required

Yes — coming from Haiti, you will need a travel adapter for Congo (DRC). Haiti uses Type A/Type B plugs, and Congo (DRC) uses Type C/Type E, so the pin shapes will not fit any wall socket. Voltages differ (110 V at home vs 230 V abroad), so check the label on each device. Most modern dual-voltage chargers handle the swing without a converter, but heating appliances usually do not. The mains frequency is also different (60 Hz vs 50 Hz). This rarely matters for electronics but can affect motor-driven devices like clocks and shavers.

Voltage converter may be needed. Check your device label — most modern electronics (phones, laptops) support 100–240 V and only need a plug adapter. Hair dryers, kettles, and older appliances may need a step-up or step-down converter.

Frequency differs (60 Hz vs 50 Hz). Rarely an issue for most electronics, but can affect motor-driven devices like clocks and shavers.

Haiti (home)

Type A Two flat parallel pins 100–127V Type B Two flat pins + round ground 100–127V

Congo (DRC) (destination)

Type C Two round pins (Europlug) 220–240V Type E Two round pins + earth hole 220–240V

Electrical specifications in Congo (DRC)

Voltage

Haiti 110 V

Congo (DRC) 230 V

Differs

Frequency

Haiti 60 Hz

Congo (DRC) 50 Hz

Differs

More about plugs in Congo (DRC)

In Congo (DRC), the standard power plug is Type C and Type E. The country runs on 230 volts at 50 Hz. That means wall sockets in Congo (DRC) can be one of 2 different shapes — Type C, Type E, and your plug needs to physically match the socket to fit.

Full Congo (DRC) plug guide