Travel adapter from Japan to Equatorial Guinea — do you need one?

Q: What plug is used in Equatorial Guinea?

Equatorial Guinea uses Type C and Type E plugs at 230 V, 50 Hz.

Compare the plug shapes, voltage and frequency in Japan and Equatorial Guinea, and find out which adapter you need before you travel.

Adapter required

Yes — coming from Japan, you will need a travel adapter for Equatorial Guinea. Japan uses Type A/Type B plugs, and Equatorial Guinea uses Type C/Type E, so the pin shapes will not fit any wall socket. Voltages differ (100 V at home vs 230 V abroad), so check the label on each device. Most modern dual-voltage chargers handle the swing without a converter, but heating appliances usually do not.

Voltage converter may be needed. Check your device label — most modern electronics (phones, laptops) support 100–240 V and only need a plug adapter. Hair dryers, kettles, and older appliances may need a step-up or step-down converter.

Japan (home)

Type A Two flat parallel pins 100–127V Type B Two flat pins + round ground 100–127V

Equatorial Guinea (destination)

Type C Two round pins (Europlug) 220–240V Type E Two round pins + earth hole 220–240V

Electrical specifications in Equatorial Guinea

Voltage

Japan 100 V

Equatorial Guinea 230 V

Differs

Frequency

Japan 50/60 Hz

Equatorial Guinea 50 Hz

Match

More about plugs in Equatorial Guinea

In Equatorial Guinea, the standard power plug is Type C and Type E. The country runs on 230 volts at 50 Hz. That means wall sockets in Equatorial Guinea can be one of 2 different shapes — Type C, Type E, and your plug needs to physically match the socket to fit.

Full Equatorial Guinea plug guide