Travel adapter from Saudi Arabia to Marshall Islands — do you need one?

Q: What plug is used in Marshall Islands?

Marshall Islands uses Type A and Type B plugs at 120 V, 60 Hz.

Compare the plug shapes, voltage and frequency in Saudi Arabia and Marshall Islands, and find out which adapter you need before you travel.

Adapter required

Yes — coming from Saudi Arabia, you will need a travel adapter for Marshall Islands. Saudi Arabia uses Type G plugs, and Marshall Islands uses Type A/Type B, so the pin shapes will not fit any wall socket. Voltages differ (230 V at home vs 120 V abroad), so check the label on each device. Most modern dual-voltage chargers handle the swing without a converter, but heating appliances usually do not.

Voltage converter may be needed. Check your device label — most modern electronics (phones, laptops) support 100–240 V and only need a plug adapter. Hair dryers, kettles, and older appliances may need a step-up or step-down converter.

Saudi Arabia (home)

Type G Three rectangular pins 220–240V

Marshall Islands (destination)

Type A Two flat parallel pins 100–127V Type B Two flat pins + round ground 100–127V

Electrical specifications in Marshall Islands

Voltage

Saudi Arabia 230 V

Marshall Islands 120 V

Differs

Frequency

Saudi Arabia 60 Hz

Marshall Islands 60 Hz

Match

More about plugs in Marshall Islands

In Marshall Islands, the standard power plug is Type A and Type B. The country runs on 120 volts at 60 Hz. That means wall sockets in Marshall Islands can be one of 2 different shapes — Type A, Type B, and your plug needs to physically match the socket to fit.

Full Marshall Islands plug guide