Power Plug Guide Will your devices work abroad?

Travel adapter from Taiwan to Papua New Guinea

⚠️

Adapter Required

Yes — coming from Taiwan, you will need a travel adapter for Papua New Guinea. Taiwan uses Type A/Type B plugs, and Papua New Guinea uses Type I, so the pin shapes will not fit any wall socket. Voltages differ (110 V at home vs 240 V abroad), so check the label on each device. Most modern dual-voltage chargers handle the swing without a converter, but heating appliances usually do not. The mains frequency is also different (60 Hz vs 50 Hz). This rarely matters for electronics but can affect motor-driven devices like clocks and shavers.

Taiwan (home)

Type A
Two flat parallel pins
Type B
Two flat pins + round ground

Papua New Guinea (destination)

Type I
Two or three flat angled pins
About Type I ↗

Electrical specs

Taiwan
110 V
60 Hz
⚡ Differs
Papua New Guinea
240 V
50 Hz
⚡ Voltage converter may be needed. Check your device label — most modern electronics (phones, laptops) support 100–240 V and only need a plug adapter. Hair dryers, kettles, and older appliances may need a step-up or step-down converter.
〜 Frequency differs (60 Hz vs 50 Hz). Rarely an issue for most electronics, but can affect motor-driven devices like clocks and shavers.

More about plugs in Papua New Guinea

In Papua New Guinea, the standard power plug is Type I. The country runs on 240 volts at 50 Hz. That means every wall socket in Papua New Guinea is the same shape — Type I, and your plug needs to physically match the socket to fit.

Full Papua New Guinea plug guide →